Please note that AfterPay is not available for all of our Aluminium, Brass & Stainless Steel Products even though checkout will allow this.
We usually dispatch with in 24-48 hours of you placing your order. Please allow 2-6 days to arrive which will depend on your location
Waterproof metal detector Gold Hunter pin pointer
Crazy Deals Online
Waterproof metal detector Gold Hunter TM is dedicated for use as a hand-held metal detector to assist in the soil searching, but its universal design and capabilities make it a device which might be used in different situations related to security and personal control. The set contains convenient holder with a belt.
Gold Hunter TM is a type of Hand held metal detector with high sensitivity, also can be used for security check.
It widely used in:
* Air ports, railway stations
* Courts, penal institutions
* Industrial factories
* Sport facilities and stadiums
* Other privet or public areas
* Mass event security
* Searching the spaces
Keep Gold Hunter TM away from any metallic objects.
Press 1 second and release the button,you will hear 2 beeps and the LED will light on, indicating power on.
Press and hold the button for a second until you hear a single beep (or single vibration in Silent Mode), indicating power down.
The Gold Hunter has two sensitivity settings and two detection settings: Audio + Vibrate or Vibrate-only (silent).
Repeatedly press the button to cycle through the settings:
* Sound + vibration + low sensitivity
* Sound + Vibration + medium sensitivity
* Sound + vibration + high sensitivity (factory default setting)
* Vibration + low sensitivity
* Vibration + medium sensitivity
* Vibration + high sensitivity
* Press and hold the button for 2 seconds, the LED light will be off
* Press and hold the button for 4 seconds, enter the setup mode
* In the setup mode, device still working
* After the adjustment mode is exited, the LED light will be on by default
Fast Retune for Mineralized Ground
To tune out the detection of saltwater, wet sand or highly mineralized ground, hold the tip of the Gold Hunter to the water, sand or soil and quick-press the button for an instant Retune.
If necessary, repeat this Fast Retune to further eliminate any environmental response.
Note: An alternate means of eliminating the ground response is to reduce Sensitivity.
Precisely Pinpointing Large Targets
Slowly scan toward the object until the response increases to full/constant alarm. Then quick-press the button to instantly retune and narrow the detection field. Continue scanning toward the object to find its precise location. Repeat this Fast Retune to further narrow detection field as needed.
After 2 minutes of being ON without a button press, the Gold Hunter will begin warning chirps for 60 seconds, and then will power off automatically.
This rugged edge is ideal for sifting through dirt while searching for the target. The Gold Hunter’s 360º-side-scan detection allows the detector to alarm when the blade
is passed in close proximity to a metallic target.
Lanyard Attachment Clip
Use to attach the Gold Hunter TM to your belt, digging pouch or your detector.
Secure to any standard size belt. A metal snap within the holster will cause the Gold Hunter to alarm if put away while powered on.
The Gold Hunter has a ruler molded into its exterior to measure a target’s depth in either centimeters or inches.
Low Battery Alarm
When the battery becomes low, the LED will keep flashing.Replace the 9V battery as soon as possible.
Simply rotate the battery cover counterclockwise to remove and clockwise to tighten by hand. To properly install the 9V battery, match the larger battery terminal to the larger opening in the compartment. Remove the battery when the unit is to be stored more than 30 days.