When low water pressure gets you down, power it up with our Giantz 6-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor, full stainless steel pump body, cast iron ends, 1.25‘’ inlet and 1‘’ outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of 200L/min with a 70m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.
Features: Powerful 2500W self-priming multi-stage pump Garden irrigation, farm irrigation and home water supply 100% duty cycle - designed for continuous operation Rust-resistant stainless steel pump body with cast iron ends Fully automatic operation on/off controller Huge 70m head Anti-corrosive alloy motor housing, ceramic and carbon seals Built-in thermal protection Efficient cooling system Highly conductive copper motor Corrosion-resistant brass connector Leak proof rubber ring Easy connecting plug and cable Fully automatic pressure controller Adjustable start-up pressure Australian standard cable and plug
Specifications: Pump: MAX power: 2500W, 3.5hp Plug and cord: SAA 250V/10A *0.3m Max pump flow: 12,000L/h (200L/min) Max head: 70m Duty cycle: Continuous Impeller Stainless steel Pump body: Stainless steel Motor shaft: Stainless steel Inlet diameter: 1.25'' (30mm) Outlet diameter: 1'' (25mm) Brass connector: 1'' Protection class: IP44 Insulation class: B (130°C) Max ambient temperature: 40°C Max liquid temperature: 60°C Controller: Voltage: 220/240V Frequency: 50/60Hz Maximum current: 10A Maximum water temperature: 60°C Maximum pressure for use: 10bar Protection grade: IP65 Inlet and outlet size: 1‘’(25mm) Dimensions: 22cm x 12.4cm x 17cm Colour: Yellow
Package Contents: Giantz 6-stage Water Pumpx 1 Pump Controllerx 1 User manualx1